Table of Contents
Advertisement
Charging the Battery
Connecting the Battery Charger
When using the RipDrive for the first time, be sure to charge the battery FIRST:
1. Plug the AC adapter/charger into an AC outlet.
2. Plug the AC adapter/charger's barrel plug into the DC 3V jack on the left side of the RipDrive.
3. Power on the unit (Hold Play/Pause button down)
When charging the battery (after plugging the AC adapter/charger's barrel plug into the charger jack)
you must press the Play/Pause button. If the AC adapter/charger connection is correct, the following
graphic below will appear on the LCD screen. During playback, the charging icon (
in the top left hand corner.
Note: In order to use the AC adaptor for playback
1.Power on the unit first (Hold Play/Pause button down)
2.Plug the AC adapter/charger's barrel plug into the DC 3V jack on the left side of the RipDrive.
) should appear
9
Advertisement
Table of Contents
