Setup Mode - Pogo RipDrive 20GB User Manual

6. Setup Mode

This mode is used to configure the RipDrive.
The setup mode consists of five (5) tabs and each tab provides options to configure the RipDrive.
1. Press and hold the MENU button.
2. Select Setup and press the Play/Pause button.
3. The Setup mode tabs and options will be displayed:
4. Use the Forward/Rewind button or the Jog key to select the desired tab. The Tab menus in this
mode are:
5. Use the Forward/Rewind button to find the preferred tab and press the Play/Pause to select it.
Use the Forward/Rewind button to select the desired setting and press the Play/Pause button
again to change those settings. You can change the settings of each menu.
6. When your changes are complete, select Exit or press the Stop button. To exit Setup mode, select
Exit, or press the Stop button again.
, ,
37