Connecting To Your Pc - Pogo RipDrive 20GB User Manual

Connecting to Your PC

Use the included USB cable to connect the RipDrive to your PC as a mass storage device to easily use its
various features. You can upload or download files to and from your PC. The RipDrive is USB 1.0, 1.1, and
2.0 compliant and reaches a maximum speed of 480Mbps for data transfer (WARNING: You should not
upload MP3 or WMA files that infringe on copyright laws.)
1. Connect one end of the USB cable (as shown below) to the USB port on the back of your PC.
2. Turn on the power of the RipDrive and connect the other end of the cable (as shown) to the
USB port of the RipDrive.
If you connect the USB cable during the playback of a file, an error may occur. Be sure to connect the USB
cable when the RipDrive is not playing. The RipDrive turns off automatically when you disconnect the USB
cable.
Note:
Please refer to "Removing the Device" (page 18) when removing the USB cable.
12