QUICK ST ART GUIDE
2
Charging The Battery
Please fully charge the battery
prior to using Radio YourWay LX.
The battery can be charged using
the AC adaptor, or by making
a USB connection with a PC or
MAC. It takes approximately
4hrs to fully charge the battery
using either method.
To Power on the unit, hold the PLAY button for 1-2 seconds.
☞If the HOLD switch is in the ON position, all buttons are disabled and
the power
on/off function will NOT work. In this case, slide the
HOLD switch off.
3
Using a Memory Card
When inserting a
memory card
in the unit, carefully
insert the memory
card properly (as shown
in the diagram taking
note of the correct
side up) or you may
damage the card
and/or Ext card slot.
☞You may need to format the memory card to the FAT file system prior
to using it. Please refer the user manual for more information.
1
Component and LCD Display
1
1 7
1 8
7
8
9
1 0
1 1
1
Internal Microphone
LED
2
LCD
3
4
REC
ERASE
5
6
A
↔
B/Repeat
7
MODE
8
TIMER
9
SD/MMC Card Slot
4
Setting Time
☞In order for timer recordings to function properly, the correct time and
date MUST be set.
☞Make sure you always have enough battery power. After 1 or 2 hours
of the battery being fully discharged the year/day/hour settings are all
lost and must be set again.
MENU & select SYSTEM using ◀▶(left/right), next
Press
select TIME SET using ▲▼(up/down) and push ▶/ ■(PLAY).
You will now see a similar screen as the one shown below.
5
Setting Date
Press
MENU & select SYSTEM using ◀▶ (left/right),next
select CALENDAR using ▲▼ (up/down) and push ▶/ ■ (PLAY).
You will now see a similar screen as the one shown below.
To move between the Year/Month/Date fields, use ▲▼ (up/down).
2
3
4
5
6
1 2
1 3
MENU
1 0
SPEED
1 1
External Speaker
1 2
1 3
USB/POWER Terminal
Volume +/-
1 4
1 5
HOLD
1 6
RESET
1 7
LINE IN
Earphone Jack
1 8
To change the Hour/Minute,
use ▲▼ (up/down)
To move between the Hr/Min fields,
use ◀▶(left/right). Push ▶/ ■(PLAY)
to confirm when you are finished.
To change the Year/Month/Date, use
◀▶ (left/right). Push ▶/ ■ (PLAY) to
confirm when you are finished.
1 4
1 5
1 6