Plustek SmartOffice PS282 User Manual page 28

Vertically to generate both front and rear image data vertically in a joined
image (the rear image will be placed below the front image).
5. Load one page of the document and click the Preview button. The scanned
image should appear in the Preview Window. To define the margins and crop
out sections of the image you don't want scanned, use the mouse to click and
drag the corners or sides of the scan area borders. Adjust the scan settings
again if the preview image is not to your liking.
6. Load all pages of the document and click the Scan button.
7. The scanned images are displayed in the FineReader main window, and you
may proceed OCR to convert images into pdf or editable text formats.
Information
Scan within HotCard BizCard Finder:
1. Click on the Windows Start button, point to Programs > Business card
Recognition Software and then click Business card Recognition Software
to launch the Business card Recognition Software.
2. Within Business card Recognition Software, click
3. In the TWAIN window that opens, select ADF (Front Side) as the Scan Type if
you want to scan single-sided business cards, or select ADF (Duplex) to scan
double-sided business cards.
4. Adjust the scanning settings (Paper Size: Automatic Size, Resolution: 300). For
ADF (Duplex) scan, you can tailor settings individually for front and rear sides
of the business cards. Click Front Side button to adjust the scanning settings
of front side and then click Rear Side button to adjust the scanning settings of
rear side.
You can enable the function of Merge Pages only when you select ADF
(Duplex) as Scan type and Automatic Size as Page Size to output the scan
images of both front and rear sides in one image. After the function of Merge
Pages is enabled, you can make the selection of Horizontally to generate both
front and rear image data horizontally in a joined image (the rear image will be
placed at the right side next to the front image), or make the selection of
Vertically to generate both front and rear image data vertically in a joined
image (the rear image will be placed below the front image).
If you usually scan images with the same
settings, you can define a scan profile to
save the settings you have configured by
entering a name or description for this new
profile in the white area beside the word
Profile and then click the Save button.
Next time when you want to scan
similar documents and apply the same
settings, you can just select this profile
from the drop-down list and then click
the Scan button.
24
from the main toolbar.