Advertisement
3.7
Installing the 12-V battery
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
Finishing work
–
Connect the 12-V battery. (
–
Mount the seat. (
–
Set the clock. (
Main work
–
Insert the 12-V battery into the battery compartment with the
terminals facing to the rear.
12-V battery (YTZ10S)
S04391-01
–
Position positive cable
–
Position negative cable
–
Mount and tighten the screw.
Guideline
Screw, battery termi-
nal
S04392-10
–
Position positive terminal cover
–
Position retaining bracket and mount and tighten screws
Guideline
Remaining screws,
chassis
S04393-10
Finishing work
–
Mount the seat. (
–
Set the clock. (
3 months
p. 9)
p. 8)
p. 19)
1
2
with washer
.
3
2
with washer
.
M6
4.5 Nm
(3.32 lbf ft)
4
.
M6
10 Nm (7.4 lbf ft)
p. 8)
p. 19)
WORK 3
5
.
11
Advertisement
