Advertisement
3.4
Disconnecting the 12-V battery
3.5
Connecting the 12-V battery
Main work
–
Remove screws
–
Push the retaining bracket toward the rear and remove it.
–
Take off positive terminal cover
–
Disconnect negative cable
–
Disconnect positive cable
–
Lift out the 12-V battery.
S04390-10
Info
Never operate the motorcycle with a discharged 12-V
battery or without a 12-V battery. In both cases, elec-
trical components and safety devices can be damaged.
The vehicle will therefore no longer be roadworthy.
Preparatory work
–
Open the fuel tank filler cap. (
–
Remove the seat. (
Main work
–
Disconnect negative cable
Info
Never operate the motorcycle with a discharged 12-V
battery or without a 12-V battery. In both cases, elec-
trical components and safety devices can be damaged.
The vehicle will therefore no longer be roadworthy.
D07481-10
Main work
–
Position washer and negative cable
tighten the screw.
Guideline
Screw, battery termi-
nal
D07481-10
Finishing work
–
Mount the seat. (
–
Set the clock. (
1
.
2
.
3
from the 12-V battery.
4
from the 12-V battery.
p. 12)
p. 8)
1
of the 12-V battery.
1
, and mount and
M6
4.5 Nm
(3.32 lbf ft)
p. 8)
p. 19)
WORK 3
9
Advertisement
