Table of Contents
Advertisement
Using Bluetooth devices
Receiving call
I
NOTE
Once the mobile phone and the moniceiver are coupled, the device
automatically switches to the Bluetooth menu as soon as an incoming
call is received.
➤ Press the
button on the remote control or
incoming call.
➤ Press the
button on the remote control or
11.4
Using audio/video devices
Selecting the Bluetooth device as audio/video source
➤ Select the audio/video source, see chapter "Selecting the audio/video source"
on page 29.
Playing music
I
NOTE
This function is only available if the audio player is equipped with
(Advanced Audio Distribution Profile) and AVRCP (Audio Video Remote
Control Profile).
A2DP is a technology used by all manufacturers allowing wireless stereo
audio signals to be sent via Bluetooth to a corresponding receiving unit.
AVRCP is a Bluetooth profile for the remote control on audio or video
devices.
➤ Open the audio player of your Bluetooth device.
➤ Set the transmission mode to Bluetooth.
✓ The music played on the Bluetooth device will be sent to the moniceiver.
I
NOTE
This function may be blocked for some Bluetooth devices and you will
first have to enable this function. Refer to the operating manual of your
Bluetooth device.
➤ Start the search for available Bluetooth devices.
➤ Select the moniceiver in the result list on your Bluetooth device.
50
on the display to accept an
on the display to hang up.
MC402
EN
Advertisement
Table of Contents
