Choosing The New Job Number - Pitney Bowes OfficeRight DI350 Operator's Manual

Create OMR Job
Use the Change (+/-) buttons
to select the access code 71.
Press Next (
to the next setting...

Choosing the New Job Number

The machine will ask for the
job number you wish the new
settings to be stored under
(the default job number is 1).
Use the Change (+/-) buttons
to display the job number you
want.
Notes:
• If you use an existing job number, the old settings will be
overwritten by the new settings you are about to make.
• If you want to find a
currently unused job
number, press Change
(+/-) until you see a job
where the display shows
no symbols alongside the
feeders or in the fold
setup area. This means the job is currently empty.
Press Next (
) to advance
) to advance to the next setting...
5-2