Table of Contents
Advertisement
Create Non-OMR Job
Choosing the new job number
The machine will ask for the
job number you wish the new
settings to be stored under
(the default job number is 1).
Use the Change (+/-) buttons
to display the job number you want.
Notes:
•
If you use an existing job
number, the old settings
will be overwritten by the
new settings you are
about to make.
•
If you want to find a
currently unused job number, press Change (+/-)until you
see a job where the display shows no symbols alongside
the feeders or in the fold setup area. This means the job
is currently empty.
Press Next (
Selecting Non-OMR Option
Press Change (+/-) until you see this option:
OMR off OMR is turned off for this job.
Press Next (
The flowchart on the following pages describe the setup for a
non-OMR job.
) to advance to the next setting...
) to advance to the next setting... (see page 3-5)
3-2
Advertisement
Table of Contents
