Table of Contents
Advertisement
License Notices
o MPEG LA AVC
THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR OTHER
USES IN WHICH IT DOES NOT RECEIVE
REMUNERATION TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE
AVC STANDARD ("AVC VIDEO") AND/OR
(ii) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
Copyright
o Any recordings made on this camera that are
played back for profit or public preview may
infringe on the rights of the owner of the
recordings.
Do not use the recordings for purpose other than
personal enjoyment without prior consent from the
owner. And even for personal enjoyment, you may
not be able to record without permission from the
owner.
Login Password
o The default password is widely known. It is very
dangerous to use the password without changing
it. Set a password that is not easily guessed.
It is also recommended to change the password
regularly.
14
Precautions
Others
o This camera will perform the initial operation of
pan/tilt/zoom upon powering on.
o The camera body may be captured in the
recording depending on the pan, tilt or zoom
position.
o Do not subject the lens to strong light source such
as sun rays. This may cause the equipment to
malfunction.
o During audio input/output, noise may occur when
the rotation mechanism is rotated horizontally/
vertically, when zooming is performed or when the
power is turned on/off. This is not a malfunction.
o The pan operation range of this product is limited
to ±170 °. Regardless of the function, operation is
not possible beyond this range.
o Some switching hubs of products that are
equipped with intelligent features may include a
broadcast/multicast suppression function.
Viewing of multicast images on this product may
fail if this function is enabled.
o The dark areas on the screen may appear grainy
or white spots may increase. When switching
between color and black-and-white images, the
brighter area on the screen is emphasized, which
may reduce the visibility. However, this is not a
malfunction.
o If the power supply voltage is momentarily cut off
or reduced due to lightning or turning on of the air
conditioner's power, the image may be disrupted
or noise interference may occur.
o When shooting objects with a luminance
difference or near a light source, ghost may occur
on the screen. This is a feature of the built-in lens,
and is not a malfunction.
o When the monitor in use has a wide display area,
lines may appear at the peripheral area of the
screen.
o Operation via an infrared remote control unit may
not work depending on where and how the camera
is installed.
Advertisement
Table of Contents
