Body Underside; Installation And Connection System Diagram - JVC TK-C205E Instructions Manual

Names and Operations of Parts
Camera Body (continued)

Body Underside

2
3
4
LW40459-001A TYPE) (E ONLY POWER
TYPE) (U ONLY
2 - WIRE BLACK
1 + WIRE RED
AC24V DC12V
OUT VIDEO - Cable BNC
INSTRUCTION
6
7
Power input cable
1
To input DC 12 V or AC 24 V power.
The AC 24 V power supply should
conform to the following:
U-type: class 2 only
E-type: Isolated power supply only
2 Video signal output connector (BNC)
This BNC connector outputs a composite
video signal. Connect this to the video
input connector of a video monitor,
switcher, etc.
3 Drop prevention wire
This wire is mounted to the ceiling slab
or channel.
CAUTION
Be sure to attach the drop prevention wire.
If not attached, the camera body could
drop down.
E-8
1
4
Main unit side
5
ISOLATED
2 CLASS
MANUAL
SEE
Mounting holes
4
These holes are used to mount the
camera body to the ceiling. When using
a 4 inch square electrical box, the 2
holes diagonally across are used to fix
the box in place.
( page 12)
5 Cable extraction hole
This hole is used when extracting cables
without opening a hole in the ceiling.
6 Cover
This cover is removed when using the
cable extraction hole.
5
Cover locking screw
7
This screw is removed when removing
the cover.
6
Installation and connection
System diagram
Camera 1
Video signal
Power
Camera 2
Video signal
Power
Camera 3
Video signal
Power
Camera 4
Video signal
Power
Power Unit
DC 12 V or AC 24 V
TO CAMERA TO CAMERA
RX+ RX RX RX- TX TX+ TX TX- COM COM 1 2 3 4 5 6 7 8 COM 9/1 10/2 COM
POWER
ON OFF
1 2
AC INPUT
1 2 3 4 5 6 7 8
1 2
ON
Switcher, etc.
• Turn OFF the power supply to all equipment to be used before making connections.
• Read the Instruction Manual for each piece of equipment to be used before making
connections.
MONITOR
Time Lapse VCR
SR-L910E
REC STOP/EJECT REC OPERATE
CHECK VIDEO CASSETTE RECORDER
PAUSE/ OPE. LOCK
REVERSE STILL PLAY COUNT/ SHIFT/TRACKING RESET
CLOCK MENU /CANCEL
REW FF MODE TIME TIMER REC SET/V.LOCK RESET AL/PL
VIDEO IN
TO
CAMERA
MONITOR
DATA I / O DATA I / O UNIT UNIT CAMERA CAMERA
10/2 11/3 12/4 13/5 14/6 15/7 15/7 16/8 16/8 COM COM AUTO AUTO ALARM ALARM COM COM SW COM COM SERIAL-1 SERIAL-1 SERIAL-2 SERIAL-2
VIDEO INPUT MONITOR
3 4 5 6 7 8
MONITOR MONITOR MONITOR MONITOR
OUTPUT OUTPUT OUTPUT OUTPUT
OUTPUT 2
1 2
3 4 5 6 7 8
VIDEO OUTPUT
MONITOR
OUTPUT 1
E-9