Chord SPM 1400 MK2 Manual

Chord SPM 1400 MK2 Manual

Advertisement

SPM 1400 MK2
POWER AMPLIFIER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPM 1400 MK2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Chord SPM 1400 MK2

  • Page 1 SPM 1400 MK2 POWER AMPLIFIER MANUAL...
  • Page 2: Installation

    This is to ensure that the chassis metalwork of each item is connected together and Chord Electronics Limited firmly recommends that an earthing method for the building is implemented.
  • Page 3: Rear Panel

    INVERTING or NON-INVERTING modes. Connecting to either the phono or the XLR on the right hand side will give an inverted output as is normal with other Chord amplification. However if a non-inverting output is preferred simply connect to the left hand side.
  • Page 4: Operation

    SERVICE INFORMATION There are no user serviceable parts in your SPM 1400 Mk2. It should only be serviced by Chord Electronics Limited or their expressly approved Service Agents. WARNING - The power supply components within this amplifier are designed to be operated at lethal voltages and energy levels.
  • Page 5: Specifications

    30dB. STABILITY Unconditional DIMENSIONS 420mm (w) x 355mm (d) x 150mm (h) WEIGHT 24Kg with 4 leg Integra fitted Made in England by: Chord Electronics Limited, The Pumphouse, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent ME16 9NB. United Kingdom. www.chordelectronics.co.uk...

Table of Contents