What's In The Box; Save Your Box - Plextor PX-708A Installation And User Manual

Section 1. Getting Started

What's In the Box

What you find in your Plextor box depends on what the company that
sold you the box put in—or took out—while the Plextor drive was in
their possession. Plextor currently sells the PX-708A drive in this
configuration:
• PX-708A DVD±R/RW and
CD-R/RW drive
• 40-pin IDE ribbon cable
• 4 mounting screws
• Extra jumper
• Emergency eject tool
• 1 piece of approved DVD+R media
• Plextor DVD with bundled software for writing DVDs and CDs
• PX-708A Installation and Users Manual
If the security sticker on
top of your box is cut,
there may be a good
reason: for example, a
dealer may have added
other components or
software. Carefully check
the contents to ensure
nothing has been
removed. If something is
missing, contact the party
from whom you
purchased the box for an
explanation.
NOTE: This applies to the Plextor retail box. Your drive may have been
shipped in a different box with other contents, depending on whom you
purchased the drive from and what they included inside the box.
If your drive came pre-installed, some or all of the items above may
have been installed and may not be separately available. See the Plextor
web site for locations to purchase additional or replacement accessories.
6
PX-708A Installation and Users Manual

Save Your Box!

Be sure to save the box after you have
installed your drive. The box and its
packaging material were designed and
drop tested to ensure your can endure
rough treatment and still arrive in
working order. If you have to ship your
drive back to Plextor, you'll want to
send it in the original box. (For more
details about returning your drive to
Plextor, see page 61.)