Admin - D-Link DIR-842 User Manual

Section 3 - Configuration
This page allows you to change the administrator (Admin) settings, like reset the Admin password and enable remote management.
From the Management menu, click System Admin.
Password: Enter a new Password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enable
Enables a challenge-response test designed to prevent online hackers
Graphical and unauthorized users from gaining access to your router's network
Authentication
settings.
(CAPTCHA):
Enable HTTPS Check to enable HTTPS to connect to the router securely. This means
Server: to connect to the router, you must enter https://192.168.0.1 instead
of http://192.168.0.1.
Enable Remote Remote management allows the DIR-842 to be configured from the
Management:
Internet by a web browser. A password is still required to access the
web management interface.
Remote Admin The port number used to access the DIR-842 is used in the URL. Example:
Port: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-
842 and 8080 is the port used for the web management interface. If
you enable HTTPS Server, you must enter https:// as part of the URL
to access the router remotely.
Click Save when you are done.
To load, save, or reset the settings, or to reboot the router, click System and refer to page 67.
D-Link DIR-842 User Manual

Admin

66