Advertisement
F53 QS (61981-01)
7/17/02
4:52 PM
Page 1
SUPRA F53/F53N
®
TELEPHONE HEADSETS
®
SUPRA
F53N
Quick Start Operation
1.1
The Supra F53 is a headset with a voice tube while the
®
SUPRA
F53
Supra F53N is the same headset with noise-canceling
microphone instead of a voice tube.
1.1
1 Identifies the components of both headsets
1.2
1.1 Adjustable Headband
1.3
1.2 Stabilizer T-Bar
1.3 Cushioned Receiver
1.4
1.2
1.4 Clothing Clip
1.3
1.6
1.5 Quick Disconnect™
1.4
1.6 Quick Disconnect to Modular Cord
1.7 Voice Tube
1.5
1.6
1.8 Noise-Canceling Microphone
2 Supra and Supra NC
1.5
1.8
50.8
Position the ear cushioned receiver (1.3) over the center of
1.7
mm
your ear.
5.1
3 Connecting the headset
The headset cable is terminated with a standard modular
connector.
To use your headset, simply insert the connector into the
6.1
headset receptacle in the base unit.
5.2
4 Adjusting the voice tube
With one hand, hold the capsule securely against your
head. With your other hand, pull out or push in the voice
6.2
tube and rotate the tip so it is two finger widths away from
your face at the corner of your mouth.
5 Adjusting the noise-canceling microphone
5.3
5.1 Adjusting the microphone boom
To adjust, carefully shape the boom with both hands as
shown.
Do not bend or twist the boom within 1.5 cm of the
microphone or capsule. Avoid repeated twisting of the
boom.
5.2 Position the noise-canceling microphone
Position the microphone approximately 1.5 cm from your
face in front of the corner of your mouth. A protective
windscreen covers the microphone . Do not use your headset
without it. Replacement windscreens are available from your
Plantronics supplier.
5.3 Ensure you speak into the front of the microphone
Make certain to speak into the front
of the microphone.
You may need to rotate the microphone toward your lips.
Temporarily remove the protective windscreen in order to
determine which side is the front of the microphone.
Do not force the microphone arm beyond its limits.
6 Clothing Clip and Quick Disconnect
6.1 Adjusting the Clothing Clip
Use the Clothing Clip to keep the headset properly seated,
free from the weight of the cord. Attach the Clothing Clip to
your clothing at a comfortable level.
To adjust the clip position on most models, squeeze the cord
retainer button and slide the cord through to provide
sufficient slack so that head movements do not disturb the
headset.
6.2 Quick Disconnect
Supra headsets are equipped with a Quick Disconnect
module that allows you to leave your work area to perform
other tasks without removing your headset.
Before attempting to use your headset, be sure that the two
Quick Disconnect halves are connected.
Advertisement
