Advertisement
FOR POOL WITH 1.25 IN. (32 MM) VALVE
STOP
GFCI TEST
OPERATION
CONTROL VALVE OVERVIEW
WARNING: To prevent equipment damage and possible injury, always
switch off sand filter before changing the Control Valve function. Changing
valve positions while the pump is running can damage the Control Valve,
which may cause personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6 different filter functions: Filter, Rinse,
Circulate, Backwash, Closed and Drain.
Filter: This function is used to filter pool
water and should be positioned here 99%
of the time. Water is pumped through the
sand filter, where it is cleaned and
returned to the pool.
A
A
Before switching on, please read the manual carefully.
1
RESET
TEST
C
B
B
26-1
2
RESET
TEST
Closed: This function stops water
flowing between the sand filter and
the pool.
A
9
3
A
C
D
C
4
RESET
TEST
c
B
Advertisement
