• Safekeeping the instruction. For reconstruction the pool set every time, please always refer to the instructions. • If instruction is missed, please contact with Bestway or search it in website: www.bestwaycorp.com • Electric installations should follow national wiring rules. Consult a qualified electrician for any questions.
Page 4
• Please examine and verify all sand filter components are present before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase.
Page 6
CONTROL VALVE OVERVIEW WARNING: To prevent equipment damage and possible injury, always switch off the sand filter before changing the Control Valve fuction. Changing valve positions while the pump is running can damage the Control Valve, which may cause personal injury or property damage.
GARDEN HOSE ADAPTOR FUNCTIONS 1. Assemble the garden hose adaptor(11). 2. Screw the garden hose adaptor onto port D of the sand filter. 3. Attach garden hose to the garden hose adaptor(21) NOTE: 1. Garden hose adaptor can be used for draining only, and can only be assembled to port D of the sand filter. 2.
Section II: Hose Configuration for Backwashing and Rinsing NOTE: Ensure the Control Valve is set to the Closed function. Your pool should be filled with water, make certain all of the pool’s Debris Screens (25)are fully submerged in water. Please check if your product includes a T-Joint (25)(see Fig. E). Please check if your product includes a T-Joint (27)(see Fig.
Section IV: Complete Sand Filter Installation Connect the Fourth Hose NOTE: It is imperative to check that the hydraulic connectors are not closed. NOTE: Ensure the Control Valve is set to the Closed function. Assemble your product referring to Fig. A-2 if there is a T-joint (Fig. E), and referring to B-2 if not. The assembly methods are the same.
Cleaning the Strainer 1. Switch off the sand filter and set the Control Valve to the Closed function. 2. Replace the Debris Screens with Stopper Plugs to prevent water from escaping. 3. Remove the Strainer Cover by unscrewing it. 4. Take out the Strainer, remove any debris. 5.
To enact a warranty claim, this form must be completed and submitted with a copy of your purchase receipt to your local Bestway After Sales Center. Please contact your local Bestway After Sales Center before sending any documents. They will provide full instructions of what is needed for your claim.
Need help?
Do you have a question about the FLOWCLEAR 58400 and is the answer not in the manual?
Questions and answers