Hood Lamp; Carbon Filter (Usage Without A Flue) - Beko BHCA97841BBHSI User Manual

2. Wash the filters in water using liquid de-
tergent and reinstall after drying.
Aluminium filters may change colour as
they are washed; this is normal and does
not require replacing your filters.
You can also wash the aluminium
filter in the washing machine. (max.
70 °C)
Removing aluminium filters
There are two aluminium filters in your
product, one is under the hood glass door
and the other one is under the hood. To re-
move these filters:
1. Reach the filter under the glass door by
opening the hood door upwards.
2. Pull down the locks of the aluminium fil-
ters as shown in the figure.
3. Gently pull the filters towards yourself
first and pull it upwards to remove it
from its slot.
There are two seals with magnet-
effect on the edges of the filter un-
der the glass door. Do not remove
these seals when removing the fil-
ter.
4. Reinstall the aluminium filters in their
slots after flushing by following the
above steps in reverse order.

5.3 Hood Lamp

In the event of a lamp malfunction in the
hood, contact your local dealer or the Cus-
tomer Service, and ensure that the lamp is
replaced.
5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without
a flue, you should replace your carbon fil-
ters every 4 months in normal use. You
can obtain the carbon filter from Author-
ized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.
Removing carbon filters
1. Open the glass cover of the hood and re-
move the aluminium filter.
EN / 18