Removing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Close the display and turn the computer over.
2
Slide the battery-release latch to the unlock position.
3
Lift the battery at an angle and remove the battery from the battery bay.
1
battery
4
Turn the computer over and open the display.
5
Press and hold the power button for 5 seconds to ground the system board.
14
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
2
battery-release latch
Before