Replacing The Palm Rest; Procedure; Post-Requisites - Dell Inspiron 14 3000 Service Manual

Replacing the palm rest

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Follow the procedure from step 1 to step 3 in
2 Follow the procedure from step 1 to step 4 in
board".
3 Follow the procedure from step 1 to step 6 in
4 Slide the speaker cable through the slot on the computer base.
5 Align the screw holes on the palm-rest assembly with the screw holes on the
computer base.
6 Replace the screws that secure the palm-rest assembly to the computer base.
7 Slide the touch-pad cable and the power-button cable into the system board
and press down on the latches to secure the cables.
8 Close the display and turn the computer over.
9 Replace the screws that secure the palm-rest assembly to the computer base.
10 Connect the speaker cable to the system board.
11 Turn the computer over and open the display.

Post-requisites

1 Replace the keyboard.
2 Follow the procedure from step 4 to step 6 in
3 Replace the base
4 Replace the battery.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Replacing the speakers".
"Replacing the power-button
"Replacing the touch
"Replacing the hard
Before
pad".
drive".
39