Stihl FS 490 C-M Instruction Manual page 49

FS 490 C-EM L:
with metal mowing
attachment
FS 360 C-EM:
FS 410 C-EM:
FS 410 C-EM L:
FS 460 C-EM:
FS 460 C-EM L:
FS 490 C-EM:
FS 490 C-EM L:
Vibration measurement a
hv,eq
ISO 22867
with mowing Handle,
head left
2
FS 360 C-EM: 2.5 m/s
2
FS 410 C-EM: 2.4 m/s
2
FS 410 C-EM L: 2.4 m/s
2
FS 460 C-EM: 2.5 m/s
2
FS 460 C-EM L: 2.1 m/s
2
FS 490 C-EM: 3.7 m/s
2
FS 490 C-EM L: 3.7 m/s
with metal mow - Handle,
ing attachment left
2
FS 360 C-EM: 2.2 m/s
2
FS 410 C-EM: 2.3 m/s
2
FS 410 C-EM L: 2.3 m/s
2
FS 460 C-EM: 1.9 m/s
2
FS 460 C-EM L: 1.9 m/s
2
FS 490 C-EM: 2.8 m/s
2
FS 490 C-EM L: 2.8 m/s
The K - factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K - factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
FS 360 C-M, FS 410 C-M, FS 460 C-M, FS 490 C-M
REACH
112 dB(A)
REACH is an EC regulation and stands
for the Registration, Evaluation,
110 dB(A)
Authorisation and Restriction of
112 dB(A)
Chemical substances.
112 dB(A)
For information on compliance with the
110 dB(A)
REACH regulation (EC) No. 1907/2006
110 dB(A)
see www.stihl.com/reach.
113 dB(A)
113 dB(A)
Exhaust Emissions
to
The CO value measured in the EU type
2
approval procedure is specified at
Handle,
www.stihl.com/co2.
right
The measured CO
2
2.2 m/s
determined on a representative engine
2
2.3 m/s
in accordance with a standardized test
2 procedure under laboratory conditions
2.3 m/s
and does not represent either an explicit
2
2.1 m/s
or implied guarantee of the performance
2
2.3 m/s
of a specific engine.
2
3.7 m/s
The applicable exhaust emission
2
3.7 m/s
requirements are fulfilled by the
intended usage and maintenance
Handle,
described in this instruction manual. The
right
type approval expires if the engine is
2
2.0 m/s
modified in any way.
2
2.0 m/s
2
2.0 m/s
2
1.6 m/s
2
1.6 m/s
2
2.8 m/s
2
2.8 m/s
2
Maintenance and Repairs
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
value was
replacement parts which have been
2
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
English
47