Table of Contents
Advertisement
PROGRAMMING GUIDE
Programming Options (cont.)
Brew Button Programming Menu
Exit appears on the display. Press
Brew by Volume -
desired volume is reached, press the same BREW button again to stop the brew cycle and set the volume.
Brew by Time - adjusts the amount of coffee brewed by time rather than by volume (the factory defaults are
LARGE 5min-25sec., MEDIUM 3min-32sec., SMALL 1min-52sec). Once accessed, press
Pre-Infusion - sets the brewer Pre-Infusion time (Pulse Brew must be off to access, the factory default is
seconds. Once accessed, press
When Pre-infusion is ON, Pulse Brew disappears from the list of menu items.
Pulse Brew - selects the pulse brew pattern (Pre-Infusion must be off to access, the factory default is C). The
choose the desired setting. Then, press
the list of program selections.
Pulse Brew Guidelines
•
Filter pack type coffees typically extract better with the A and B pulse setting.
•
Decaffeinated coffees typically extract better with the B pulse setting.
•
High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
•
Settings D and E are manual pulse counts.
By-Pass -
Language - changes the language that appears on the display (the factory default is English). This feature is
programmable for changing and adding languages. Once accessed, press
then press
to exit.
Model Select - changes the model number and number of batches (to match the label on the universal control
module, the factory default is Gemini-Twin IF, single batch). Once accessed, press
matching the model number label on the brewer appears, then press
to exit, then re-enter the Brew Button Program to program the next one.
repeatedly
repeatedly
to exit.
or
to choose the desired setting, then, press
to exit.
or
to change the number value. Press
to change the number value. Press
to choose the desired setting, then, press
or
Press
or
.
to exit.
PG2
until
MEDIUM
or
until the
or
until the
or
until "ex"
to exit. To turn off pulse
or
to
to exit.
to choose the desired setting,
or
until the model number
until the number of batches
Advertisement
Table of Contents
