Oi50 - Curtis G3 Gemini IntelliFresh GEMXSIFT63A1000 User Manual

OPERATING INSTRUCTIONS
Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while "Brewing" appears on the display.
NOTICE - Only use GEM3XIFT IntelliFresh
The G3 Gemini Intellifresh brewer is factory preset for optimal performance.
The brewer should be ON.
switch. "Ready to brew"
should be on the display.
4 Fill with the proper amount
of amount of ground coffee.
The brewer will brew coffee based on the settings programmed into the universal control module
(UCM). To change the settings, see the PROGRAMMING GUIDE section. When brewing starts,
the warmer will come on inside the satellite. Press the warmer button to change the heat setting
(low, medium, high).
®
satellites on GEMX series IntelliFresh brewers.
Place an empty GEMX
IntelliFresh satellite under the
brew basket. Make sure the
satellite is pushed all the way
back against the front cover
and is making contact with
the electrical socket.
5
into the brew rails under the
control panel. Slide it all the
way back until it stops.
3
the brew basket.
6 Press the brew button. Brewing
will begin immediately.
Warmer Button

OI50