Bose S1 PRO+ Manual page 74

Wireless pa system
Hide thumbs Also See for S1 PRO+:
Table of Contents

Advertisement

SYMPTOM
Intermittent or no audio
from a source connected
to a wireless transmitter
Unusually quiet or loud
audio from a source
connected to a Bose
Wireless Mic/Line
Transmitter
No audio from a source
connected to a channel
input with an insert
cable while a wireless
transmitter is connected
Humming or feedback
from an effects unit
connected to a
channel input with
an insert cable
TR OUBL ES H O OTI N G
SOLUTION
Make sure the transmitter is securely connected to the source.
Check the connection light to make sure the transmitter is
connected to the system (see page 63). If the light is turned
off, see "Wireless transmitter doesn't connect to system" on
page 73.
Check the power light to make sure the transmitter is powered on
(see page 62).
Check the connection light to make sure the transmitter isn't
muted (see page 63). If it is, unmute the transmitter
(see page 39).
Move the transmitter and source closer to the system (within
20 ft or 6 m) and away from any interference or obstructions.
See "Intermittent or no audio from an instrument or audio source
connected by an input cable" on page 70.
Reset the transmitter (see page 77). Pair the transmitter to
the channel again (see page 37). Power on and connect the
transmitter to the source, then test for audio.
Make sure that the transmitter is set to the appropriate input
setting for your source (mic or line input). See "Change between
mic and line input" on page 40.
Make sure that the Insert setting for that channel is set to Auto,
not Off (see page 41).
On the wireless transmitter for that channel, check the power
light and connection light to make sure the transmitter is
powered on and connected to the system (see page 62 and
page 63). If it isn't, the system treats the effects unit as an
input, which can create humming or feedback.
Make sure the Expanders setting for that channel is set to On, not
Off (see page 75).
Any remaining ground hum may be due to your effects unit.
To help, you can purchase a hum eliminator at your local
music retailer.
|
7 4
E N G

Advertisement

Table of Contents
loading

Table of Contents