Connection; Video Outputs - Xoro HSD 8460 User Manual

Connection

Video Output
Connecting with a VIDEO (CVBS) cable
The video (CVBS) cable transmits the signals for brightness (Y-signal) and colour (C-signal) in a
combined way. You should only use this connection if no other connection type can be used. Plug a
cable into the VIDEO (CVBS) socket on the rear side of your DVD player. The other side of the
cable must be connected to the VIDEO input socket of the TV-set (usually labelled "VIDEO IN" or
"AV IN". Please also refer to your TV set's user manual). As VIDEO (CVBS) does not transmit
sound, you also must add an audio connection.
Insert one end of the supplied audio (Cinch [RCA]) cable into the white/red Cinch [RCA] socket L/R
AUDIO OUT at the back of the DVD player and the other end into the audio input socket (usually
white/red) on the TV set (usually labelled "AUDIO IN" or "AV IN". Please also refer to your TV set's
user manual)
Switch on the TV set and select the s-video input or the respective channel number. For channel
number and input selection please also refer to your TV operating instructions.
Connecting with a HDMI Cable
HDMI is a digital transmission technology for both audio and video. Connect the DVD player and
display with a HDMI-HDMI cable. Please note that some TV set can not support RAW audio. In this
case, please set the DVD player audio digital output to PCM.
If your TV set is not equipped with HDMI, but with DVI input, you can use a conversion cable or an
adapter to DVI.
As DVI does not transmit sound, you also must add an audio connection. Insert one end of an audio
(Cinch [RCA]) cable into the white/red Cinch [RCA] socket ML/MR AUDIO OUT at the back of the
DVD player and the other end into the audio input socket (usually white/red) on the TV set (usually
labelled "AUDIO IN" or "AV IN". Please also refer to your TV set's user manual)
You can choose in the settings "Resolution" by the option "System Settings" the resolution which
you want or which the TV set supports.
Switch on the TV set and select the HDMI or DVI input. For input selection please also refer to your
TV operating instructions.
HSD 8460 / HSD 8470
13