Quick Start Guide - Xoro HSD 8460 User Manual

1. Connect the power adapter (supplied with the player) to the side input and to a wall outlet.
2. Press the STAND-BY button (Please refer No. 6).
3. Press the OPEN/CLOSE button (Please refer No. 4).
4. Inserting a DVD disc (Please refer No. 1 - Disc Loader). Align the center of the DVD disc
with the center of the disc guide.
5. Then press the OPEN/CLOSE button again (Please refer No. 5).
6. In general, the DVD already inserted into the player will start reading automatically. If not,
press the PLAY button (Please refer No. 5).
7. When you want to stop, press the STOP button (Please refer No. 5).
8. If you want to playback content from USB flash storage, please put the USB flash storage
into the USB plug (No. 3) of the DVD player. Press the USB button on the remote control
and choose the option USB and press the ENTER button. The player changes into the USB
mode.
9. To power off the unit, press the POWER button on the remote control or the STAND-BY
button (Please refer No. 6). The device goes into Stand-By mode.
Insert batteries and Operation radius
•
Open the battery cover of the remote control.
•
Insert the battery into the receptacle and insert the receptacle into the remote.
•
Please uses only batteries of the type AAA/R03 (1.5 V)
•
Please pay attention to the right polarity, which are given with the label + or –.
•
Close the battery cover of the remote control.
•
For the best results, aim the remote towards at the player, screwing window. Stay within 5
metre and angles of 60 degrees or less.
•
Under normal use the battery will last for one year.
•
Remove battery during storage or when you are not using the DVD player for a long
time.evice, please disconnect the power plug from the wall outlet.
10

Quick Start Guide

HSD 8460 / HSD 8470