EuroLite LED PSU-10A Artnet/DMX Controller for LED Pixel Tubes User Manual page 30

Art-Net control
Connect the LED PSU-10A Artnet/DMX Controller to the Art-Net system by installation method 1 or 2 (see
diagrams below).
Set the LED PSU-10A Artnet/DMX Controller to Art-Net Mode, and now the entire system can be controlled
by Art-Net.
Installation method 1:
Installation method 2:
Please note: - The Ethernet Switch must be a Gigabit Switch.
- Do not daisy-chain more than 50 LED controllers from a single network port of the Ethernet
Switch.
- A maximum of 2 output network ports of the Ethernet Switch can be used. So the system
can control a maximum of 100 controllers.
30/32 00088351, Version 1.1