Rohm BD93E11GWL EVK Quick Start Manual

Usb pd controllers series

Advertisement

USB PD Controllers Series
BD93E11GWL EVK Quick Start Guide

Introduction

The Document is the quick start guide of the BD93E11GWL EVK.

Overview of the EVK

3
The check list before the operation.
A jumper is on the JP_VIOSEL terminal.
1.
A jumper is on the JP_STP terminal (Any positions are acceptable.)
2.
A jumper is on the JP_OTP terminal (Any positions are acceptable.)
3.
Each DIP switch, SW_VMAX, SW_VMIN, and SW_PMIN, shall have only one position. SW_VMAX is to position "8". SW_VMIN and
4.
SW_PMIN are to position "1" in each.
Note: An external power source is unnecessary due to supporting dead battery mode.
© 2021 ROHM Co., Ltd.
QUICK START
1
1/3
4
GUIDE
2
No. 64QS008E Rev.001
DEC.2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BD93E11GWL EVK and is the answer not in the manual?

Questions and answers

Summary of Contents for Rohm BD93E11GWL EVK

  • Page 1 GUIDE USB PD Controllers Series BD93E11GWL EVK Quick Start Guide Introduction The Document is the quick start guide of the BD93E11GWL EVK. Overview of the EVK The check list before the operation. A jumper is on the JP_VIOSEL terminal. A jumper is on the JP_STP terminal (Any positions are acceptable.) A jumper is on the JP_OTP terminal (Any positions are acceptable.)
  • Page 2 Digital Multimeter BD93E11GWL-EVK-001 Note that changing the configuration via each DIP switch requires the power cycle to be updated, so please disconnect the source device from EVK by removing a cable. © 2021 ROHM Co., Ltd. No. 64QS008E Rev.001 DEC.2021...
  • Page 3 BD93E11GWL EVK QUICK START GUIDE Revision History Revision Date Description Number Dec. 6. 2021 Initial release © 2021 ROHM Co., Ltd. No. 64QS008E Rev.001 DEC.2021...
  • Page 4 Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information.

Table of Contents