Installing On An S7-1500 Standard Rail - Siemens SIMATIC NET SCALANCE W734-1 Operating Instructions Manual

4.3

Installing on an S7-1500 standard rail

Procedure
Follow the steps below to fit the SCALANCE W774/W734 to an S7-1500 standard rail:
1. Place the device on the upper edge of the S7-1500 standard rail as shown in the figure.
2. Screw the housing to the S7-1500 standard rail. The required screw ships with the device.
3. Mount the connecting cables and the antenna, see section "Connecting up (Page 35)".
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09
R1 A1 PLUG R1 A2
DO NOT REMOVE PLUG
WHILE POWER IS ON
P1 LAN P2 LAN
L1+ M1 M2 L2+
4.3 Installing on an S7-1500 standard rail
L1
L2
PoE
P1
P2
R1
F
PoE
Mounting
31