Troubleshooting - Stanley SCH20C2K-BR Instruction Manual

26 • ENGLISH
PROBLEMA
Unit will not start.
Unit starts immediately upon inserting
battery.
Battery pack will not charge
Unit shuts off abruptly.
Solamente para propósito de Argentina:
Importa y Distribuye: Black & Decker Argentina S.A.
Pacheco Trade Center Colectora de Ruta Panamericana
Km. 32.0 El Talar de Pacheco Partido de Tigre
Buenos Aires (B1618FBQ) República de Argentina
CUIT: 33-65861596-9 Tel.: (011) 4726-4400
Importado por: Black & Decker do Brasil Ltda.
Rod. BR 050, s/n° - Km 167
Dist. Industrial II Uberaba - MG - Cep: 38064-750
CNPJ: 53.296.273/0001-91
Insc. Est.: 701.948.711.00-98
S.A.C.: 0800.703.4644
Solamente para propósito de Colombia:
Importado por: Black & Decker de Colombia, S.A.
Carrera 85D # 51-65, Bodega 23
Complejo Logístico San Cayetano
Bogotá - Colombia
Tel.: 744.7100
TROUBLE SHOOTING
CAUSA POSIBLE
Battery pack not installed properly.
Battery pack not charged.
The switch has been left in the "On"
position.
Battery pack not inserted into charger.
Charger not plugged tin.
Surrounding air temperature too hot
or too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life
of the battery pack it is designed to
shut off abruptly when the charge is
depleted).
Solamente para propósito de Chile:
Importado por: Black & Decker de Chile, S.A.
Avenida Andrés Bello 2457, Oficina 1603
Providencia - Santiago de Chile
Tel.: (56-2) 2687.1700
Solamente para propósito de México:
Importado por: Black and Decker S.A de C.V.
Antonio Dovali Jaime #70 Torre B Piso 9
Col. Santa Fé Delegación Alvaro Obregón
Ciudad de México, México. C.P 01210
Tel: (52) 55 53267100
R.F.C.BDE8106261W7
Importado por: Black & Decker del Perú S.A.
Av. Circunvalación del Club Golf
Los Incas N° 152 - 154, Lote 4, Oficinas 601 – 602
Urb. Club Golf Los Incas - Santiago de Surco
Lima – Perú Tel.: (511) 614-4242
RUC 20266596805
SOLUCIÓN POSIBLE
Check battery pack installation.
Check battery pack charging
requirements.
The switch must be moved to "Off"
to prevent the tool from immediately
starting when battery is inserted
Insert battery pack into charger until
LED lights.
Plug charger into a working out let.
Refer to "Important charging notes"
for more details.
Move charger and battery pack to a
surrounding air temperature of above
40°F (4,5°C) or below 105°F +40,5°C).
Allow battery pack to cool down.
Place on charger and allow to charge.
Hecho en China
Fabricado na China
Made in China
N587398
02/13/2018