Connecting with wireless LAN
When using Windows Vista
When the user has the computer administrator authority
You can perform Easy Wireless Set Up if you have administrator authority on the computer. See page 14.
When logging on without administrator authority
Before starting up Wireless Manager ME 4.5, the "Setting the computer IP address" (See page 25) must first be performed.
After completing this operation, start up Wireless Manager ME 4.5.
Confirm to your system administrator before changing any settings.
Following settings are examples of when using a default setting projector.
Projector settings ※"Glossary" (See pages 69 - 70)
1
Turn on the projector and press the [NETWORK] button on the remote control.
Select [USER 1] - [USER 3] from [WIRELESS LAN] at the network menu and press
2
the [ENTER] button.
Set the details of network and select [OK].
3
As for network setting items, see pages 53 - 55.
Confirm to your system administrator before changing any settings.
<Example>
DHCP
※
IP ADDRESS
※
SUBNETMASK
※
SSID
※
MODE
AUTHENTICATION
ENCRYPTION
ENCRYPTION KEY
SETTING
(cont.)
OFF
192.168.11.100
255.255.255.0
Panasonic Projector
AD HOC
※
OPEN
※
(Some computers may require connection by [SHARED
NONE .... When not performing encryption
WEP ...... When performing encryption
When [ENCRYPTION] setting is [WEP
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4
: Set these to match the WEP key registered in [DEFAULT KEY].
※
]:
24
※
] authentication.)