Panasonic PT-F100NTE Manual page 20

Connecting with wireless LAN
Detected issue
When a change in The settings of Wireless Network
the settings made connection have been changed.
by the utility has When a Wireless LAN Card utility or
been detected any other utilities are active,
stop the operation of such utilities,
then restart the application.
When a setting No response from the wireless LAN
error for the card.
wireless LAN card Check the followings:
has been detected - Wireless LAN Card conditions
- Driver version (Latest)
When the user Please execute "Easy Connection"
does not have using the administrator authorization
the administrator mode.
authority
Issues other than Please perform the following checks,
the above when the projector cannot be found.
[Projector setup]
(1) Is the power on for the projector?
(2) Is the Network capability on?
(3) Has the network channel number
correctly been set up?
[Computer setup]
(1) Is Wireless capability on?
(2) Is the Firewall application
causing a network block?
Displayed information
(cont.)
Remarks
The wireless LAN utility used by the computer may
have changed the wireless settings.
Close the utility, and then make the connection again
using Easy Wireless Set Up connection.
• Is the wireless LAN card effective?
• Is your wireless LAN card properly recognized?
• Some wireless LAN cards may allow Easy Wireless
Set Up connections to function if drivers are
updated.
If you have logged onto a computer as a [GUEST]
or a restricted user who does not have administrator
authority, you can not perform Easy Wireless Set Up
(Network No. [1] – [4]).
If you must perform Easy Wireless Set Up without
administrator authority, designate [U] as the network
number.
20
Reference page
−
P.71
P.22/P.24