Sony BRAVIA KD-49X7007G Reference Manual page 3

• Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by illustration when
measured from the attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
8 mm – 12 mm
Transporting
• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
• When lifting or moving the TV set, hold it firmly from the
bottom.
• When transporting the TV set, do not subject it to jolts or
excessive vibration.
• When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
Screw (M6)
Wall-Mount Bracket
TV's rear cover
Topple prevention
KD-65X7007G / 55X7007G
8 mm – 12 mm
M6 screw (not supplied)
Cord (not supplied)
KD-49X7007G / 43X7007G
8 mm – 12 mm
M6 screw (not supplied)
Cord (not supplied)
This receiver complies with the minimum requirements as
specified in National Telecommunications Commission,
Memorandum Circular 02-03-2016, Regarding the Sale and
Labeling of ISDB-T Receivers, including Memorandum Circular
No. 01-0302017, Amending Certain Provisions of Section 2 of
NTC Memorandum Circular No. 02-03-2016 (Sale and Labeling
of ISDB-T Receivers).
1.5 N·m
{15 kgf·cm}
Screw (not
supplied)
1.5 N·m
{15 kgf·cm}
Screw (not
supplied)
3 GB