Introduction Installation • The TV set should be installed near an easily accessible AC Thank you for choosing this Sony product. power outlet (mains socket). Before operating the TV, please read this manual thoroughly and • Place the TV set on a stable, level surface to prevent it from retain it for future reference.
Page 4
Use only Sony supplied AC power cords (mains lead), not those of other brands. Insert the plug fully into the AC power outlet (mains socket).
Page 5
Ask your dealer or Sony service centre to have it checked by Disconnect the TV set from AC power outlet (mains socket) and qualified service personnel.
Caution about handling the remote control Precautions • Observe the correct polarity when inserting batteries. • Do not use different types of batteries together or mix old and Viewing the TV new batteries. • View the TV in moderate light, as viewing the TV in poor light or •...
(Sensors/LED indicator) • Receives signals from the remote control. Parts and Controls Do not put anything over the sensor. Doing so may affect its function. • Lights up in amber when the [Sleep Timer] or [On Timer] is set (page 23), or the TV is in Photo Frame Mode (page 15).
EXIT Return to the previous screen or exit from Remote Control the menu. When an Interactive Application service is available, press to exit from the The remote control shape, location, availability service. and function of remote control button may vary depending on your region/country/TV model.
Page 9
+/– (Volume) (Text) Adjust the volume. In text mode, displays Text broadcast. Each time you press , the display changes AUDIO cyclically as follows: Text Text over the TV picture (mix mode) Select the sound of multilingual source or dual sound for the programme currently ...
Type 1: Secured network with Wi-Fi Connecting TV to the Internet Protected Setup™ (WPS) The WPS standard makes security of a wireless Setting up the Internet home network as straightforward as pressing the WPS button on the wireless LAN router. Connection Before setting up a wireless LAN, check the location of the WPS button on the router and...
Type 2: Secured network without Wi-Fi Type 3: Unsecured network with any Protected Setup™ (WPS) type of wireless LAN router To set up a wireless LAN, SSID (wireless network To set up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key) will be name) will be required.
Privacy Policy When you use the following functions to Internet connect to the Internet, certain information will be sent to Sony Corporation’s global servers, Modem which is considered to be personal information, with and requires your agreement in order for service router providers to use it.
Changing the Viewing Style Watching TV Press on the TV or the remote control Changing the Wide Mode to turn on the TV. Press repeatedly to select the wide Press ANT/DIGITAL/ANALOG to switch mode. between Cable and Antenna channels. [Wide Zoom]* [Normal] Press the number buttons or CH/PROG...
Photo Sharing Plus Navigating through Home Menu Connect, view and save favourite photos on TV using your devices (e.g. smartphones or tablets). The HOME button allows you to access a variety of TV settings and features. HOME [All Apps] [Photo Sharing Plus] Note •...
Using the TV as a Photo Frame Mode Listening to FM Radio Photo Frame Mode displays the clock and HOME [All Apps] [FM Radio] calendar at the same time as displaying a Note photo, and listening to music or FM radio. •...
[Programme List]. You can enjoy photo/music/video files stored in a Sony digital still camera/camcorder/ smartphone (depending on models)* through a USB cable or USB storage device on your TV. Connect a supported USB device to the * Device needs to be in Media transfer mode (MTP).
Page 17
The data on the USB device may be damaged. Video Codec: MPEG1, MPEG2 • Sony will not be held liable for any damage to, or loss Audio Codec: MPEG1 Layer1/2, MP3, Dolby of, data on the recording media due to a malfunction Digital (2ch), Dolby Digital of any connected devices or the TV.
Playback Photo/Music/Video via Home Settings Network You can enjoy various content (e.g. photo/ System Settings music/video files) stored on DLNA Certified™ media servers. The home network feature Note allows you to enjoy network content in other • The options you can adjust vary depending on the rooms.
Page 19
Mastered in 4K Sound Optimises picture quality for Blu-ray Discs ClearAudio+ mastered in 4K. Applies to 1080/24p Let you enjoy the best sound quality by the signals only. combination of a well-balanced digital signal processing technology. Random noise reduction Reduce repetitive random noise. Sound Mode Select according to content you want to Digital noise reduction...
Page 20
Dual Sound 4:3 Default Sets the sound from the speaker to [Mono], Sets the default [Wide Mode] for a 4:3 [Stereo], [Main] or [Sub]. input signal. Note Auto Display Area • If the signal is very weak, the sound becomes monaural automatically.
Page 21
Manual Programme Preset: Before Digital Set-up selecting [Channel]/[AFT]/[Audio Digital Tuning: Filter]/[Skip]/[Colour System], press Digital Auto Tuning CH/PROG +/– to select the Tunes in the available digital channels. programme number with the channel. This option allows you to retune the TV You cannot select a programme after moving house, or to search for new number that is set to [Skip] (page 21).
Page 22
Technical Set-up: Note • Entering the correct PIN code for blocked Auto Service Update channel or external input will temporarily Enables the TV to detect and store new deactivates the [Parental Lock] feature. To digital services as they become reactivate the [Parental Lock] settings, turn off available.
Page 23
Home Network Setup: First day of the week: Sets [Sunday] or [Monday] as the first day of the week Server Display Settings on the calendar. Displays the connected server list. You can select the server to display in the Device Selection. USB Auto Start Server Diagnostics When USB device is connected to the USB...
Page 24
Subwoofer: To enable, set [Headphone/ LED Indicator Audio Out] to [Subwoofer]. Select [On] to light up the LED indicator. Subwoofer Level Select [Off] to disable it. Adjust subwoofer volume level. Phase AV Set-up Select the phase polarity. Label Video Inputs: Assigns name to Subwoofer Sync external equipment input.
Page 25
For details, see page compatible with BRAVIA Sync Control. When set to [On], the following functions are available. If the specific Sony equipment that is compatible with BRAVIA Sync Control is Reset connected, this setting is applied to...
Network. Note • Software update via the internet may vary depending on your region/country/TV model. • To update the software, please visit Sony support website. Automatic Software Download Select [On] to download the software automatically. Select [Off] to disable it.
Viewing Pictures from Connected Equipment Connection Diagram You can connect a wide range of optional equipment to your TV. Note • Depending on TV model, connecting a large USB device may interfere with other connected devices beside it. • When connecting a large USB device, connect only 1 USB jack. Headphone/Home Audio System/Subwoofer HDMI Device...
Page 28
Picture Quality • AV composite cable • HDMI cable • Antenna (aerial) cable Standard definition (SD) videos have picture signals with a High definition (HD) videos have picture signals vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines. with a vertical resolution of 720 or 1,080 lines. (For 4K vertical resolution: 2,160 lines)
. Then, select [Yes] in the supports speed of 18 Gbps bearing the HDMI logo. confirmation display. (Recommended SONY Cable). • When connecting mono equipment, connect the To display registration notification when audio cable to the L (mono) jack.
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 31
Remove the screws from the rear of the TV KD-65X7000E To detach the Table-Top Stand from the TV KD-55X7000E KD-49/43X7000E...
Page 32
Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 41-42 (Specifications) for the TV’s weight.
Page 33
Standard mounting KD-65X7000E Pulley Screw (+PSW 6 x 20) Spacer (60 mm) Screw (+PSW 6 x 50) Belt KD-55X7000E Screw (+PSW 6 x 50) Screw (+PSW 6 x 20) Pulley Spacer (60 mm) Belt ...
Page 34
KD-49/43X7000E Screw (+PSW 6 x 50) Screw (+PSW 6 x 20) Pulley Spacer (60 mm) Belt Soft cloth Slim mounting Note • You cannot use some of the terminals on the rear of the TV when using this mounting style. KD-65X7000E KD-55X7000E KD-49/43X7000E...
Page 35
KD-65X7000E Pulley Spacer (20 mm) Screw (+PSW 6 x 20) Belt KD-55X7000E Screw (+PSW 6 x 20) Screw (+PSW 6 x 20) Pulley Spacer (20 mm) Belt Soft cloth...
Page 36
KD-49/43X7000E Screw (+PSW 6 x 20) Pulley Screw (+PSW 6 x 20) Spacer (20 mm) Belt Soft cloth Connect necessary cables to the TV. Note • You cannot access to any terminal after installing the TV to the wall. To detach the Table-Top Stand from the TV.
Page 37
Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the Wall” of Operating Instructions supplied with the Wall-Mount Bracket. Model Name KD- Hook Location 65X7000E 55X7000E 49X7000E 43X7000E Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
The picture of a display unit is composed of If the problem persists, contact your dealer or pixels. Tiny black points and/or bright points Sony service centre with the number of times (pixels) on the screen do not indicate a the LED indicator flashes red (interval time is malfunction.
Screen mirroring function using providers. wireless LAN. Keep the TV or Sony Screen mirroring compatible devices (Xperia) away from Good picture quality but no sound on the such devices, or turn them off if possible.
Reconfigure your network settings. General If the LAN cable is connected to an active server and the TV has acquired an IP address, check your The TV turns off automatically (the TV enters DLNA Certified™ media server’s connections and standby mode) configurations.
ARC (Audio Return Channel) (HDMI IN 3 only) (Two channel linear PCM: 48 kHz, 16 bits, Dolby Specifications Digital, Dolby Digital Plus, DTS) DIGITAL AUDIO OUT (OPTICAL) System Digital optical jack (Two channel linear PCM: Panel system 48 kHz, 16 bits, Dolby Digital, DTS) LCD (Liquid Crystal Display) Panel, LED Backlight /...
Page 42
Protected Setup and Wi-Fi CERTIFIED Logo are trademarks or registered trademarks of Wi-Fi Alliance. • “BRAVIA” and are trademarks of Sony Corporation. • “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray Disc Association. • For DTS patents, see http://patents.dts.com.
• 將 AC 電源供應器連接至易於插拔的 AC 電源插座。 • 切勿將 AC 電源線盤繞在 AC 電源供應器上。 如果出現下列問題 … 芯線可能折斷和 / 或這可能導致電視機故 如果出現以下任何問題,請立刻關閉電視機並拔下 AC 電源線。 障。 請諮詢您的經銷商或 Sony 服務中心以交由合格的服務人員進行檢 查。 • 手濕時切勿觸碰 AC 電源供應器。 • 如果您發現 AC 電源供應器異常,立刻將 AC 當: 電源供應器從 AC 電源插座拔下。 AC 電源線損壞。...
通過 USB 播放相片 / 音樂 / 視訊 • 連接 Sony 數位相機時,要將相機的 USB 連接模式設定 為自動或大容量存儲。關於 USB 連接模式的詳細資訊, 請參考數位相機附帶的說明。 您可以通過 USB 纜線或 USB 存儲裝置在電視機上 • 使用符合 USB 大容量存儲裝置等級標準的 USB 存儲裝 欣賞儲存在 Sony 數位相機 / 攝影機 / 智能手機 置。 (視型號而定) 中的相片 / 音樂 / 視訊檔案。 • 如果所選檔案含有不正確的內容資訊或者不完整,則無 法播放。...
Page 61
Dolby Digital Plus Out: 當 Dolby 環繞音效 Digital Plus 透過連接的音響系統可用 實際重現真實環繞音效聲音。 時,選擇 [ 自動 ] 使 Dolby Digital Plus 串流通過 ARC。 環繞聲效果 在 Dolby Digital Plus 串流輸出時, 調整環繞音效聲音效果。 Digital Audio Out (optical) 被靜 音。 聲音修復 (DSEE) 選擇 [ 關 ] 可針對 ARC (音響系統) 和...