Table of Contents
Advertisement
User's Guide
Note:
If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
8. Press the
button.
Related Information
"Checking the Network Connection Status" on page 35
&
"When You Cannot Make Network Settings" on page 200
&
Making Wi-Fi Direct (Simple AP) Connection Settings
This method allows you to connect the printer directly to devices without an access point. The printer acts as an
access point.
Important:
c
When you connect from a computer or smart device to the printer using the Wi-Fi Direct (Simple AP) connection,
the printer is connected to the same Wi-Fi network (SSID) as the computer or smart device and the communication
is established between them. Since the computer or smart device is automatically connected to the other connectable
Wi-Fi network if the printer is turned off, it is not connected to the previous Wi-Fi network again if the printer is
turned on. Connect to the printer's SSID for Wi-Fi Direct (Simple AP) connection from the computer or smart
device again. If you do not want to connect every time you turn the printer on or off, we recommend using Wi-Fi
network by connecting the printer to an access point.
1. Select
on the home screen.
To select an item, move the focus to the item using the
2. Select Wi-Fi Direct.
3. Press the OK button.
If you have made Wi-Fi Direct (Simple AP) settings, the detailed connection information is displayed. Go to
step 5.
Network Settings
u d l r
buttons, and then press the OK button.
33
Advertisement
Table of Contents
