EVGA X299 Micro ATX 2 Installation Manual page 66

EVGA X299 Micro ATX 2 (121-SX-E296)
Once RAID is enabled and all devices are detected, press F10 to save and exit. Upon
reboot, repeatedly press "Delete" to reenter the BIOS. Once in the BIOS, go back to
the "Advanced" tab where you'll find a new item at the bottom of the list called "Intel
®
Rapid Storage Technology."
The Intel Rapid Storage Technology utility in the BIOS replaces the Intel RAID
® ®
manager that was previously launched outside of the BIOS in previous generation
motherboards. Due to the current bootup process, speed of processors, and UEFI the
previous method made accessing the Intel RAID manager nearly impossible. This is
®
the same controller that was previously accessed by CTRL-I; now, it is fully accessible
within the BIOS/UEFI.
Once in the RAID controller, you will see a list of all detected drives and a "Create
RAID Volume" button. To begin, click on "Create RAID Volume" or navigate to the
button and hit "Enter."
- 66 -