Trimming Operation; Basic Trimming Operation With Nylon Line Cutting Head - Shindaiwa CL590 Operator's Manual

Always stop the engine when a cutting attachment jam occurs. Do not attempt to remove an object causing a jam if the
engine is running. Severe injury can occur if a jam is removed and the cutting attachment suddenly starts.
1. Quick release pin
2. Pull out

Basic trimming operation with nylon line cutting head

Using shoulder harness
Place shoulder harness over left shoulder and ad-
just straps so the quick release pin rests just below
the waist.
The basic cutting actions
DANGER
3. Shaft tube

Trimming operation

Trimming operation
Never attempt to operate the product with one hand.
Ensure that you hook your thumbs around the grips, wrapping
them in your thumb and remaining fingers.
Always mount the trimmer correctly using the shoulder har-
ness.
The shoulder harness is fitted with an emergency release
function. In the event of a fire or other emergency, pull the
quick release pin up to release the product from your body.
Buckle waist belt. Belt should be snug.
Attach product to harness.
Check for correct adjustment by moving cutting attachment along
ground.
Re-adjust position of suspension point if necessary.
The basic cutting actons pictured are:
Trimming, scything, scalping and lawn edging.
These actions are as follows:
25