Epson EcoTank Pro M15180 Series User Manual page 315

Administrator Information
Items
Network Folder (SMB)
Save to
User Name
Password
FTP
Save to
User Name
Password
Connection Mode
Port Number
Registering Destinations as a Group Using Web Config
If the destination type is set to Email, you can register the destinations as a group.
1. Access Web Config and select the Scan/Copy tab > Contacts.
2. Select the number that you want to register, and then click Edit.
3. Select a group from Type.
4. Click Select for Contact(s) for Group.
The available destinations are displayed.
>
Settings to Use the Printer
\\"Folder path"
Enter the location where the target folder is located between 1 and 253 characters
in Unicode (UTF-8), omitting "\\".
Enter a user name to access a network folder in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter a password to access a network folder in 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter the server name between 1 and 253 characters in ASCII (0x20-0x7E),
omitting "ftp://".
Enter a user name to access an FTP server in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous and FTP. If
you do not specify this, leave it blank.
Enter a password to access to an FTP server within 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not
specify this, leave it blank.
Select the connection mode from the menu. If a firewall is set between the printer
and the FTP server, select Passive Mode.
Enter the FTP server port number between 1 and 65535.
315
>
Making Contacts Available
Settings and Explanation