Epson EcoTank Pro M15180 Series User Manual page 195

Solving Problems
Multiple sheets of paper are fed into the printer at the same time.
Solutions
See the following to prevent multiple sheets of paper being fed into the printer at the same time.
"Several Sheets of Paper are Fed at a Time" on page 145
&
Paper Is Smeared or Scuffed
The following causes can be considered.
Paper is loaded incorrectly.
Solutions
When horizontal banding (perpendicular to the printing direction) appears, or the top or bottom of the
paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper.
"Loading Paper" on page 32
&
The paper path is smeared.
Solutions
When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the
paper path.
"Cleaning the Paper Path for Ink Smears" on page 119
&
The paper is curled.
Solutions
Place the paper on a flat surface to check if it is curled. If it is, flatten it.
The print head is rubbing the surface of the paper.
Solutions
When printing on thick paper, the print head is close to the printing surface and the paper may be
scuffed. In this case, enable the reduce scuff setting. If you enable this setting, print quality may decline or
printing may slow down.
❏ Control panel
Select Settings > General Settings > Printer Settings, and then enable Thick Paper.
>
Printing, Copying, and Scanning Quality is Poor
>
Print Quality is Poor
195