Checking And Cleaning The Print Head - Epson EcoTank Pro M15180 Series User Manual

Maintaining the Printer
❏ This pattern allows you to perform alignment if you see horizontal banding at regular intervals.
Find and select the number for the least separated and overlapping pattern.

Checking and Cleaning the Print Head

If the nozzles are clogged, the printouts become faint or there is visible banding. If the nozzles are severely clogged,
a blank sheet will be printed. When print quality has declined, first use the nozzle check feature to check if the
nozzles are clogged. If the nozzles are clogged, clean the print head.
Important:
c
❏ Do not open the scanner unit or turn off the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
❏ Head cleaning consumes ink and should not be performed more than necessary.
❏ When ink is low, you may not be able to clean the print head.
❏ If print quality has not improved after repeating nozzle check and head cleaning 3 times, wait for at least 12
hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We
recommend turning off the printer by using the
Cleaning.
❏ To prevent the print head from drying out, do not unplug the printer while the power is on.
1. Select Maintenance on the printer's control panel.
2. Select Print Head Nozzle Check.
3. Follow the on-screen instructions to load paper and print the nozzle check pattern.
>
Improving Print, Copy, and Scan Quality
P
button. If print quality has still not improved, run Power
116
>
Checking and Cleaning the Print Head