Product Description And Specifications; Product Features - Bosch Professional GWS 15-125 CIEH Original Instructions Manual

OBJ_BUCH-194-007.book Page 9 Tuesday, September 6, 2016 10:32 AM

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Release lever for protection guard
2 Spindle lock button
3 Thumbwheel for speed preselection
(GWS 15-125 CIEH/GWS 15-125 CITH)
4 On/Off switch
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Kickback stop
Restarting Protection
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure 01:2014
– without auxiliary handle
– with auxiliary handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Assembly
Mounting the Protective Devices
 Before any work on the machine itself, pull the mains
plug.
Bosch Power Tools
5 Auxiliary handle (insulated gripping surface)
6 Grinder spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for grinding
13 Grinding wheel*
14 Protection guard for cutting*
15 Cutting disc*
16 Hand guard*
17 Rubber sanding plate*
18 Sanding sheet*
19 Round nut*
20 Cup brush*
21 Cutting guide with dust extraction protection guard *
22 Diamond cutting disc*
23 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS ... 15-125 CIH 15-125 CIEH 15-125 CITH 15-150 CIH
3 601 ... H30 2..
H30 C.. H30 D..
W 1500
W 860
-1
min 11000
-1
min – 2800 – 11000 2800 – 9300
mm 125
M 14
mm 22




–
kg
2.5
kg 2.4
/II
Note: After breakage of the grinding disc during operation or
damage to the holding fixtures on the protection guard/power
tool, the machine must promptly be sent to an after-sales ser-
vice agent for maintenance for addresses, see section "After-
sales Service and Application Service".
English | 9
*
H30 3.. H30 4.. H30 5..
H30 E.. H30 F..
1500 1500 1500
860 860 860
11000 9300 9300
125 125 150
M 14 M 14 M 14
22 22
 
 
 
 
 
2.5 2.5
2.4 2.4
/II /II
1 609 92A 1UD | (6.9.16)
–
22




–
2.6
2.5
/II