Table of Contents
Advertisement
Quick Links
GWS 11-125 CIH
GWS 15-125 CIH
GWS 15-125 CIEH
GWS 15-125 CITH
GWS 15-150 CIH
PROFESSIONAL
Bedienungsanleitung
Operating instructions
Instructions d'emploi
Instrucciones de servicio
Manual de instruções
Istruzioni d'uso
Gebruiksaanwijzing
Betjeningsvejledning
Bruksanvisning
Brukerveiledningen
Käyttöohje
Οδηγία χειρισµού
Kullanım kılavuzu
Advertisement
Table of Contents
Related Manuals for Bosch GWS 11-125 CIH
Summary of Contents for Bosch GWS 11-125 CIH
- Page 1 GWS 11-125 CIH GWS 15-125 CIH GWS 15-125 CIEH GWS 15-125 CITH GWS 15-150 CIH PROFESSIONAL Bedienungsanleitung Operating instructions Instructions d’emploi Instrucciones de servicio Manual de instruções Istruzioni d’uso Gebruiksaanwijzing Betjeningsvejledning Bruksanvisning Brukerveiledningen Käyttöohje Οδηγία χειρισµού Kullanım kılavuzu...
- Page 2 GWS 15-125 CIEH GWS 15-125 CITH PROFESSIONAL 1 609 929 L08 • 18.12.06 1 609 929 L08 • 18.12.06...
-
Page 3: General Power Tool Safety Warnings
General Power Tool Safety 3) Personal safety a) Stay alert, watch what you are doing and Warnings use common sense when operating a power tool. Do not use a power tool while Read all safety warnings and all WARNING you are tired or under the influence of instructions. -
Page 4: Machine-Specific Safety Warnings
d) Store idle power tools out of the reach of The rated speed of the accessory must be at children and do not allow persons unfa- least equal to the maximum speed marked miliar with the power tool or these on the power tool. -
Page 5: Kickback And Related Warnings
Never lay the power tool down until the Use special care when working corners, accessory has come to a complete stop. The sharp edges, etc. Avoid bouncing and snag- spinning accessory may grab the surface and pull ging the accessory. Corners, sharp edges or the power tool out of your control. -
Page 6: Functional Description
When wheel is binding or when interrupting Use suitable detectors to determine if utility a cut for any reason, switch off the power lines are hidden in the work area or call the tool and hold the power tool motionless local utility company for assistance. -
Page 7: Technical Data
5 Auxiliary handle Intended Use 6 Grinder spindle 7 Extraction hood for sanding* The machine is intended for cutting, roughing, and brushing metal and stone materials without using 8 Mounting flange with O-ring water. 9 Carbide grinding head* For cutting metal, a special protection guard for cut- 10 Clamping nut ting (accessory) must be used. -
Page 8: Declaration Of Conformity
7 is not suitable for working metals. 18.12.2006, Robert Bosch GmbH, Power Tools Division D-70145 Leinfelden-Echterdingen A suitable Bosch vacuum cleaner can be connected to the extraction hood 7. The extraction hood 7 is mounted in the same manner as the protection guard 12. The brush collar is Assembly exchangeable. - Page 9 Hand Guard Rubber Sanding Plate For operations with the rubber sanding plate For operations with the rubber sanding plate 16 or with the cup brush/wheel brush/flap 16 or with the cup brush/wheel brush/flap disc, always mount the hand guard 15. disc, always mount the hand guard 15.
-
Page 10: Starting Operation
Operation Approved Grinding Tools All grinding tools mentioned in these operating Starting Operation instructions can be used. The permissible speed [rpm] or the circumferential Observe correct mains voltage! The voltage speed [m/s] of the grinding tools used must at least of the power source must agree with the match the values given in the table. -
Page 11: Operating Instructions
Flap discs have a considerably higher service life, lower noise levels and lower sanding temperatures The vacuum cleaner must be approved for the extrac- than conventional sanding sheets. tion of masonry dust. Bosch provides suitable vacuum cleaners. Cutting Metal For cutting metal, always work with the pro- tection guard for cutting 13. -
Page 12: Maintenance And Service
Australia and New Zealand In extreme working conditions, conductive dust can accumulate in the interior of the Robert Bosch Australia Pty. Ltd. machine when working with metal. The pro- RBAU/SPT tective insulation of the machine can be 1555 Centre Road degraded. - Page 13 Disposal The machine, accessories and packaging should be sorted for environmental-friendly recycling. Only for EC countries: Do not dispose of power tools into household waste! According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its imple- mentation into national right, power tools that are no longer usable must be collected sep- arately and disposed of in an environmentally correct manner.