Huawei RP200 Room Presence Installation Manual page 56

14 Installing the VPT300
CAUTION
All cables connected to the VPT300 must be sorted into the groove of the cable trough on the
camera spacer. The outer edge of the VPT300 must be 1 cm away from the surface of the display.
2
Install the VPT300 onto the rack.
1 cm
52
Mount the VPT300 on the top
of the display based on the
screw hole.
Bottle gourd-shaped mounting peg
Adjust the position of the
VPT300 to align it with display,
and move the VPT300 towards
the RP rack by 1 cm.
Tighten the screws to secure
the VPT300.