12 Installing the RP200 Display (Method 2)
10.1
12.2
Installing the Display
2
2
Assemble the dual-screen brackets.
Place the left, middle, and right brackets horizontally on the floor.
Left
Insert the ends of the left and right
brackets onto the middle bracket.
3
3
Secure the dual-screen brackets.
Middle
Use an M6 hex key or Phillips screwdriver to tighten the screws.
At the joint where the ends of two brackets are connected, install the two
screws in the middle and then the four screws in the upper and lower parts.
Then, tighten the screws in sequence. A total of 12 M6 x 16 Phillips head
hexagon upset screws are required.
41
Right