Instrument And Control Functions; Main Switch/Steering Lock - Yamaha NMAX 2016 Owner's Manual

Main switch/steering lock

LOCK
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
main switch positions are described
below.
TIP
The main switch/steering lock is
equipped with a keyhole shutter. (See
page 3-2 for keyhole shutter opening
and closing procedures.)
ON
All electrical circuits are supplied with
power; the meter lighting, taillight and
auxiliary lights come on, and the en-
gine can be started. The key cannot be
removed.
TIP
The headlight comes on automatically
when the engine is started and stays
on until the key is turned to "OFF",
even if the engine stalls.
OFF
All electrical systems are off. The key
can be removed.

Instrument and control functions

EAUN0264
OFF
ON
EAU60600
EAU10662
WARNING
Never turn the key to "OFF" or
"LOCK" while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
LOCK
The steering is locked and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1
1. Push.
2. Turn.
1. Turn the handlebars all the way to
the left.
2. With the key in the "OFF" position,
push the key in and turn it to
"LOCK".
3. Remove the key.
TIP
If the steering will not lock, try turning
the handlebars back to the right slight-
ly.
3-1
EWA10062
EAU1068B
2
3