Sony NW-ZX300 Help Manual page 25

9.
Built-in Bluetooth antenna
The antenna allows the Walkman to connect with Bluetooth devices.
Do not cover the antenna when a Bluetooth connection is active. Otherwise, the connection may be interrupted.
10.
Headphone jack (Stereo Mini) (*2)
Connect headphones with a stereo mini plug.
Push in the headphone plug until it clicks into place.
Connect the headphones properly. Otherwise, the output sound will be impaired.
11.
Headphone jack (Balanced Standard) (*2)
Connect headphones with a balanced standard plug.
Push in the headphone plug until it clicks into place.
Connect the headphones properly. Otherwise, the output sound will be impaired.
Connect passive headphones (*3) to the headphone jack (Balanced Standard) only.
If you use an audio cable to connect the headphone jack (Balanced Standard) to the line-in jack of an audio
device, it may damage the device.
12.
N-mark
Touch the N-mark on a Bluetooth device to this mark.
The Bluetooth device must support the NFC function.
You can connect the Bluetooth device to the Walkman.
13.
Access lamp
Do not remove the microSD card when the access lamp is lit up.
14.
microSD card slot cover
Open the cover to insert a microSD card.
15.
microSD card slot
Insert a microSD card until it clicks into place.
Note on the front surface of the Walkman
Matte glass is used on the front surface of the Walkman. The glass prevents the adhesion of fingerprints and lets your
fingers slide more easily while you are operating the Walkman.
Matte glass has an uneven surface. Due to this characteristic, it may be difficult to remove scratches or dirt. Make sure
not to touch the surface with the following objects.
Metal products that are made of aluminum or magnesium (headphones, cameras, keyrings, coins, etc.)
Packaging materials that contain aluminum foil (packaging for gum, chocolate, tablets, etc.)
Sony recommends that you use a case or a pouch to protect the surface of the glass.
*1
There are tactile dots on the
*2
When headphones are connected to both headphone jacks (Stereo Mini and Balanced Standard), output from one headphone jack (Balanced
Standard) will be prioritized.
Disconnect from the Bluetooth connection to use wired headphones.
*3
Passive headphones: Headphones without a Noise Canceling function or Bluetooth function.
button and the + button. The tactile dots can help you operate the buttons without looking at them.
25