Thank you for choosing a Pixi pushchair. Pixi is a robust and comfortable pushchair that is designed to transport children with milder disabilities. The pushchair is primarily designed to be used outdoors. Pixi should not be used to transport anything other than children.
CLEANING & MAINTENANCE The cushions may be reconditioned at 60º, spun, and drip-dried. Do not use bleach or rinsing agent. NB Do not dry clean! Clean the chassis manually using car shampoo/polish. Health service providers: 60ºC disinfection in a washing cabinet. Ensure that the tyre are pumped to the correct pressure.
LABEL All the important technical information can be found on the Pixi pushchair's label. 1. Product name 2. Part number 3. Serial number 4. Manufacturing date 5. Max. user weight 6. CE marking 7. Manufacturer's name 8. Barcode ...
UNPACKING PIXI • Remove the pushchair from its box (1). • Loosen the back angle adjustment wheel one turn (2). • Open the chair in a single move (3). You should hear a click once the unfolding mechanism reaches locked position.
FOLDING PIXI • Undo the back angle wheel (5). • Take hold of the locking mechanisms on both sides of the chassis and pull them up (6). • Raise the safety catch on the left hand side (7). • Push the operation handle forwards whilst simultaneously lifting the back arc upwards using your hand (8), placing your foot on the rear shaft to make things easier.
HANDLE ADJUSTMENT • To adjust the angle of the operation handle, press or hold in the buttons on the operation handle grip (10). • Twist the handle to the desired position (11). • Release the buttons. Warning! When using on stairs and when lifting, the handle most be folded down. Grip the chassis behind/on the handle to safely handle the pushchair and child (12, 13).
FOOTREST ADJUSTMENT • The foot plate can be lifted to facilitate getting in and out of the chair (16). • To adjust the height of the foot plate, undo the two screws at the rear of the foot plate using the enclosed Allen key (17).
ATTACHING CUSHIONS • Thread the pocket in the upper section of the back support cushion over the upper edge of the back sup- port (20a). • Pull the lower section of the back support cushion down through the space between the seat and the back (21a). •...
WAIST BELT ADJUSTMENT In order to avoid injury, it is very important that these instructions are followed to the letter. The enclosed waist belt must only be used with a Pixi pushchair. • To adjust the belt, place the child in the pushchair. •...
TRANSPORT • Follow these instructions in order to avoid injuring the child and/or damaging the chair during transport in a motor vehicle. • Only use tensioning equipment approved for use with the vehicle between the pushchair and floor, and fol- low the manufacturer’s recommendations.
STANDARD EQUIPMENT, PIXI • Chassis Small / Large • Front link wheel/Fixed wheels • Moulded seat unit • Adjustable back support • Footrest- Height adjustable & foldable • Foot brake on rear wheels • Operating handle - Height adjustable • Waist belt ACCESSORIES LIST A wide variety of accessories are available for Pixi that can help customise the chair to the needs of the user.
TECHNICAL INFORMATION Materials • The pushchair is powder coated. • The upholstery is flame retardant in compliance with standards ISO EN 1021-1 and 1021-2. The cushion is washable. Small Large Small Large 28 cm 33 cm 69-44x37 cm 91-48x37 cm 25-30 cm 35-40 cm 12 kg...
Need help?
Do you have a question about the Pixi Eurovema and is the answer not in the manual?
Questions and answers