Table of Contents
Advertisement
en Before using for the first time
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
Place the wire rack on the universal pan so that
1.
both spacers
are on the rear edge of the univer-
sal pan.
Insert the universal pan between the two guide rods
2.
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
7 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Note: You can also enter the settings using the Home
Connect assistant. In this case, press
last point in the initial configuration. If your appliance is
connected, follow the instructions in the app.
Setting the language
1.
Use the rotary selector to select the required lan-
guage.
Press .
2.
a The next setting appears.
Setting the time
Turn the rotary selector to set the current time.
1.
Press .
2.
a The next setting appears.
Setting the date
Use the rotary selector to set the current day.
1.
Press .
2.
Use the rotary selector to set the current month.
3.
Press .
4.
Use the rotary selector to set the current year.
5.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
10
6.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
6.
a A notification appears on the display confirming that
7.2 Cleaning the appliance before using
it for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
to go to the
2.
3.
4.
5.
6.
7.
8.
a The Siemens logo appears in the display. A type of
Press .
the initial configuration is complete.
Remove the product information and the accessor-
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
Press
to switch the appliance on.
Apply the following settings:
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 10
Press
to start the operation.
Ventilate the kitchen while the appliance is heat-
‒
ing.
When the cooking time has elapsed, press
switch the appliance off.
Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
Clean the accessories thoroughly using a detergent
solution and a dish cloth or soft brush.
The
button lights up blue.
‒
heating and a temperature are then displayed.
4D hot air
Maximum
1 hour
to
Advertisement
Table of Contents
