Pioneer AVIC-S1 User Manual page 72

User's manual AVIC-S1
- 70 -
In the S map view, the following buttons are available:
TANDARD
Alignment of the map
Red point shows up (north): the map is aligned so that north is
always at the top. Touch the button to align the map in
accordance with the driving direction.
Red point is not pointing upwards: the map is aligned so that the
driving direction is always at the top. Touch the button to align
the map to the north.
Alignment to the driving direction is recommended for the
navigation because the directions right and left on the map are
then shown exactly as they are in reality.
Note: North alignment is only possible when the map is being
displayed in 2D mode. In 3D mode, north alignment is not
possible.
Back
The Back button is only visible if the zoom level bar is shown.
Touch this button to hide the zoom level bar and maintain the
altered map scale.
Autozoom
The Autozoom button is only visible if the zoom level bar is
showing and the map scale has been changed.
Touch this button so that the map scale is automatically changed
according to your speed: if you drive slowly, the map scale
becomes smaller, if you drive quickly, the map scale becomes
greater.
Show entire route
The button is only visible if a route has been calculated. Touch
this button to view the entire route in the map.
Note: By touching the map you can quickly change the map view
to Search for destination. Refer to the next chapter for more
information ("Search for destination view" on page 71).
Map views